Results 1 to 5 of 5
  1. #1
    Senior Member
    Join Date
    Sep 2016
    Location
    Lichfield, Staffordshire
    My Ride
    Harley-Davidson 2015 Fat Bob
    Posts
    171
    Thanked: 58

    V&H Short Shots - Hose Clamp Query

    Any of you guys know what size hose clamps/jubilee clips I need to replace those that have corroded etc on my Fatbob’s V&H Short Shots and where to buy them from ?

    Thanks in anticipation...

  2. #2
    Senior Member bluenose-1956's Avatar
    Join Date
    May 2014
    Location
    Halifax, United Kingdom.
    My Ride
    2011 XL883N Iron
    Posts
    4,041
    Thanked: 1410
    Hi Kev Mate,

    Try Westfield fasteners for USA style stainless hose clamps.

    industrial-or-home-universal-american-style (1).jpgindustrial-or-home-universal-american-style.jpg

    You'll need to buy type T350 clamps with a 5/16" wide band.

    If your Short Shots have seven clips you'll possibly need the following, but you're best to check the size of your own clips before ordering

    4 off, part number WF106, 38mm - 57mm diameter @ £7.42 including VAT.
    3 off, part number WF107, 44mm - 63mm diameter @ £6.20 including VAT.

    That's £13.62 plus postage.

    Regards,

    Dave.

  3. The Following 2 Users Say Thank You to bluenose-1956 For This Useful Post:

    Gettin'onabit (10-20-2018), percysybil (10-19-2018)

  4. #3
    Senior Member Gettin'onabit's Avatar
    Join Date
    Oct 2016
    Location
    Suffolk
    My Ride
    Harley-Davidson
    Posts
    849
    Thanked: 309
    What Bluenose shows are the correct type - if you use the ones with the raised slots, you will find they don't slide easily and become jammed.

  5. The Following 2 Users Say Thank You to Gettin'onabit For This Useful Post:

    bluenose-1956 (10-20-2018), percysybil (10-24-2018)

  6. #4
    Senior Member bluenose-1956's Avatar
    Join Date
    May 2014
    Location
    Halifax, United Kingdom.
    My Ride
    2011 XL883N Iron
    Posts
    4,041
    Thanked: 1410
    Quote Originally Posted by Gettin'onabit View Post
    What Bluenose shows are the correct type - if you use the ones with the raised slots, you will find they don't slide easily and become jammed.
    Thanks AL,

    Yes the type I have shown are known as the American type, they are used by H-D as stock fitment on the heat shields.

    The T350 clips are 100% stainless steel in construction, some so called stainless clips only have a stainless band and a zinc plated mild steel worm drive mechanism, these tend to rust and seize up.

  7. The Following User Says Thank You to bluenose-1956 For This Useful Post:

    percysybil (10-24-2018)

  8. #5
    Senior Member
    Join Date
    Sep 2016
    Location
    Lichfield, Staffordshire
    My Ride
    Harley-Davidson 2015 Fat Bob
    Posts
    171
    Thanked: 58
    Thanks gents... ordered from Westfield Fasteners

  9. The Following User Says Thank You to percysybil For This Useful Post:

    bluenose-1956 (10-24-2018)

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •